Voice Secure / Clear Strapping

(Conventional Personality, Secure)

Selects the secure encryption transmit mode for the current Conventional Personality.

When the Analog Flat Audio field is enabled, this field must be set to "Clear"; otherwise, it becomes invalid. Therefore both features may not be enabled on the same Personality.

(When the Primary Frequency Band is "900MHz"),

(when Allow Invalid Frequencies is enabled, and

when 900 MHz Used in Codeplug is enabled),

And

(when the Secure Operation field is set to "Hardware", and

when the Rx Voice / Signal Type field is set to "Non-ASTRO", and

when the Tx Deviation / Channel Spacing for one of the current Frequency Options profiles (records / rows) is set to "2.5khz / 12.5khz"),

Then this field must be set to "Clear"; otherwise, it becomes invalid.

( When the Secure Operation field is set to "Hardware" or "Advanced Digital Privacy", and

when the Talkgroup field is "Disabled", and

(when the Rx Voice / Signal Type field is "Mixed Mode"), or

(when the Rx Voice / Signal Type field is "ASTRO", and

when the Remote Site Interface System field in the referenced Conventional System is "Disabled") ),

( When the Secure Operation field is set to "Hardware", and

when the Rx Voice / Signal Type field is "Non-ASTRO" ).

SELECTIONS:	DEFINITIONS:
Select	Allows the radio-user to toggle on or off secure encrypted communications. Either the Secure Tx Select button-press or the Secure Tx Select switch-toggle or the Secure menu-selection allows the radio-user to toggle between Secure or Clear communications for that channel.
Clear	Straps or commits the channel to normal (non-secure) Conventional operation.
Secure	Straps or commits the channel to secure encrypted operation.

Go to the Secure Page